HP Hitachi Dynamic Link Manager Software - Manual (Page 387)

6. Command Reference
365
KAPL01102-I All the paths which pass the specified HBA
port will be changed to the Offline(C) status. Is this
OK? [y/n]:y
KAPL01103-I If you are sure that there would be no problem
when all the paths which pass the specified HBA port are
placed in the Offline(C) status, enter y. Otherwise,
enter n. [y/n]:y
KAPL01061-I 15 path(s) were successfully placed
Offline(C); 0 path(s) were not. Operation name = offline
#
-cha -pathid
AutoPATH_ID
Use this parameter to place offline, at one time, all the paths that pass through a
specific CHA port. The command will place offline all the paths that pass through
the CHA port to which the path with the specified AutoPATH_ID is connected.
Specify the current AutoPATH_ID of the target path, which is displayed by using
the
view
operation. For details on the
view
operation, see 6.7 view (Displays
Information). Leading zeros can be omitted (
000001
and
1
indicate the same
AutoPATH_ID). Therefore, when the target AutoPATH_ID is
000000
, enter
000000
or
0
for the parameter value.
AutoPATH_IDs are re-assigned every time the host is restarted. When you want
to add a new LU without restarting the host, AutoPATH_IDs are re-assigned to
each path of the LU when you execute the
dlmcfgmgr
utility for managing the
HDLM configuration. Always make sure that you execute the
view
operation to
find the current AutoPATH_ID of the target path, before executing the
offline
operation.
Example
The following example shows how to place offline all paths connected to the
CHA port
0A
. In this example, a path whose AutoPATH_ID is
000001
is
connected to the target CHA port:
# /opt/DynamicLinkManager/bin/dlnkmgr offline -cha
-pathid 000001
KAPL01055-I All the paths which pass the specified CHA
port will be changed to the Offline(C) status. Is this
OK? [y/n]:y
KAPL01056-I If you are sure that there would be no problem
when all the paths which pass the specified CHA are placed
in the Offline(C) status, enter y. Otherwise, enter n.
[y/n]:y
KAPL01061-I 2 path(s) were successfully placed
Offline(C); 0 path(s) were not. Operation name = offline
#