HP Hitachi Dynamic Link Manager Software - Manual (Page 316)

4. HDLM Operation
294
Figure 4-1: Example of executing the format command
3. Execute the
dlmsetconf
utility for creating the HDLM driver configuration
definition file to update the HDLM driver configuration definition file (
/
kernel/drv/dlmfdrv.conf
).
# /opt/DynamicLinkManager/bin/dlmsetconf
4. Set up LUs not to be managed by HDLM.
If you do not want HDLM to manage one of the newly recognized LUs, set up the
LU so that it is excluded from HDLM management. For details, See 3.5.5 Using
the HDLM Device Unconfiguration Function When Performing a New
Installation of HDLM.
If you do not want to specify settings to exclude such LUs from management, skip
to step 5.
5. If you are using VxVM, you need to disable, from VxVM, any devices (such as
sd or ssd devices) other than the HDLM devices corresponding to the added LU.