HP Hitachi Dynamic Link Manager Software - Manual (Page 342)

4. HDLM Operation
320
# /opt/DynamicLinkManager/bin/dlmsetconf -u
4. Restart the host, with the reconfiguration option specified:
# reboot -- -r
(2) Changing a Non-HDLM-Managed Device to an HDLM-Managed Device
To change a non-HDLM-managed device to an HDLM-managed device:
1.
Check the path information of the LU to be managed by HDLM.
Use the
format
command to check the information for each path of the LU to be
managed by HDLM. Figure 4-5: Example of executing the format command
shows an example of executing the
format
command.
Figure 4-5: Example of executing the format command
In this example, the shaded portion indicates the path information of the LU to be
managed by HDLM.
2. Edit the HDLM driver unconfiguration definition file (
/opt/
DynamicLinkManager/config/dlmfdrv.unconf
).