HP Hitachi Dynamic Link Manager Software - Manual (Page 190)

3. Creating an HDLM Environment
168
Figure 3-14: Mirroring a boot disk environment in which HDLM manages the
boot disk
In this example, the LU device names of the boot disks are
c8t50060E08000436D1d4
and
c8t50060E08000436D1d5
, as shown in figure
above.
In the examples of commands and settings here, assume that the following slices are
allocated:
• Slice 0:
/
(
root
) file system
• Slice 1: Swap device and dump device
• Slice 6:
/usr
file system
• Slice 7: SVM state database
1. Prepare another LU with the same capacity as that of the created boot disk, and
make the configuration and capacity of slices the same.
2. Create the SVM state database.
# matadb -a -f c8t50060E08000436D1d4s7