HP Hitachi Dynamic Link Manager Software User Manual

Page 397

6. Command Reference

375

Reference

Executing the

view

operation together with standard UNIX commands enables you to

filter the path information listed for a specific HBA port or CHA port. For details on

the

view

operation, see 6.7 view (Displays Information).

We recommend that you execute the following command and verify the information

on the target paths before you execute the

online

operation to place online all the

paths connected to a specific HBA port or CHA port.
Example 1

The following example shows how to filter and display the information on all

paths that pass through the HBA port whose host port number is

0004

and bus

number is

0000

# /opt/DynamicLinkManager/bin/dlnkmgr view -path | grep
0004.0000

The above command will display information on all the paths that pass through

the specified HBA port.

Example 2

The following example shows how to filter and display the information on all

paths that pass through the CHA port

of the Thunder 9500V Series:

# /opt/DynamicLinkManager/bin/dlnkmgr view -path -stname |
grep 9500V | grep 0A

The above command will display information pertaining to only those paths that

pass through the specified CHA port.