beautypg.com

HP Hitachi Dynamic Link Manager Software User Manual

Page 177

background image

3. Creating an HDLM Environment

155

- Add the slice identifier of the

/

(

root

) file system (

:a

value from :a to

:h

)

to the end.

An example in which Sun Microsystems' HBA is used with Solaris 8 or Solaris 9

is presented below. For details on finding the boot device name when using an

HBA other than from Sun Microsystems, and on setting the HBA in the OBP, see

the documentation for the HBA you are using.
Execute the

dlnkmgr

command's

view

operation with the

-lu

,

-item

,

pd

,

type

, and

-hdev

parameters specified. An execution example is shown below.

Edit the

Physical

Device

character string of any owner path in the execution

results as follows. The edited path will be the boot device name that you need to

specify in the OBP.

Delete the

/device

part.

Replace the driver name of the ssd driver (

ssd

) with

disk

.

Add the slice identifier of the

/

(

root

) file system (any ID from

:a

to

:h

)

to the owner path.

By editing the character strings in the underlined part of the above execution

example in this way, you get the following character string. This is the boot device

name to specify in the OBP:


/ssm@0,0/pci@1c,600000/pci@1/SUNW,qlc@4/fp@0,0/
disk@w50060e80004361d1,1:a

Note

In Solaris 8 or Solaris 9, find and make a note of the boot device names to

specify in the OBP for all owner paths in case an error occurs on the path