HP Hitachi Dynamic Link Manager Software - Manual (Page 78)

3. Creating an HDLM Environment
56
3.1 HDLM System Requirements
Check the following before installing HDLM:
3.1.1 Hosts and OSs Supported by HDLM
You can install HDLM on Sun SPARC series computer on which an OS listed in
Table 3-1: Applicable OSs for the host is running.
Table 3-1: Applicable OSs for the host
#1
If the EFI label is used, use Solaris 9 4/03 or later.
#2
If ZFS is used, use Solaris 10 6/06 or later.
JDK required for linkage with Global Link Manager
To link with Global Link Manager, make sure that the JDK package 1.4.2_15 (32-bit
version) or later or JDK package 5.0_11 (32-bit version) or later is already installed on
the host. The JDK does not need to be installed if linkage with Global Link Manager
is not used. When HDLM is installed in an environment in which the JDK has not been
installed, the KAPL09241-W message is displayed. If linkage with Global Link
Manager is not used, this message requires no action. Note that the display of the
KAPL09241-W message does not affect HDLM operation.
3.1.2 Storage Systems Supported by HDLM
The following shows the storage systems that HDLM supports.
(1) Storage Systems
Applicable storage systems for use as data disks:
• Hitachi AMS2000/AMS/WMS/SMS series
• Hitachi NSC55
OS Required patches
Solaris 8 108434-04 or later, 108974-10 or later, 121972-04 or later, and Recommended Patch
Cluster Aug/27/02 or later
Solaris 9
#1 118335-08 or later, and Recommended Patch Cluster Nov/12/02 or later
Solaris 10 #2 119685-07 or later and 127127-11 or later are required. Also, other patches are required
depending on the host bus adapters being used. For details on the other patches, see the
HDLM Release Notes.