HP Hitachi Dynamic Link Manager Software User Manual
Page 393
6. Command Reference
371
Use this parameter to place online, at one time, all the paths that pass through a
specific HBA port. The command will place online all the paths connected to the
HBA port that has the specified host port number and bus number.
Specify the host port number and bus number of the target HBA port: the numbers
are found in the
PathName
field displayed using the
view
operation. Enter a
period between these two parameter values. For details on the
view
operation, see
6.7 view (Displays Information).
Example
The following example shows how to place online all paths connected to the
HBA port whose host port number is
0001
and bus number is
0000
:
When the confirmation message is displayed, the user enters
y
to continue,
or
n
to cancel the operation.
# /opt/DynamicLinkManager/bin/dlnkmgr online -hba
0001.0000
KAPL01057-I All the paths which pass the specified HBA
will be changed to the Online status. Is this OK? [y/n]:y
KAPL01061-I 3 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
#
-hbaid
HBA-port-ID
Use this parameter to place online, at one time, all paths that pass through a
specific HBA port. The command will place online all paths connected to the
HBA port that has the specified HBA-port-ID. To display the HBA port IDs,
execute the following
view
operation:
# /opt/DynamicLinkManager/bin/dlnkmgr view -hba
For details about how to execute the view operation to display the HBA port IDs,
see
(4) To display HBA port information
in 6.7.2 Parameters.
Example
The following example shows how to place online all paths connected to the
HBA port whose HBA-port-ID is
00001.
# /opt/DynamicLinkManager/bin/dlnkmgr online -hbaid
00001
KAPL01104-I All the paths which pass the specified HBA
port will be changed to the Online status. Is this OK?
[y/n]:y
KAPL01061-I 15 path(s) were successfully placed Online;