HP Hitachi Dynamic Link Manager Software - Manual (Page 195)

3. Creating an HDLM Environment
173
Figure 3-15: Current boot disks and boot disks after the migration
The LU device names of the current boot disks are
c6t50060E08000436D1d4
and
c6t50060E08000436D1d5
, and the LU device names of the boot disks after the
migration are
c8t50060E08000436D1d6
and
c8t50060E08000436D1d7
, as
shown in the above figure.
In the examples of commands and settings here, assume that the following slices are
allocated:
• Slice 0:
/
(
root
) file system
• Slice 1: Swap device and dump device
• Slice 6:
/usr
file system
• Slice 7: SVM state database
1. Decide the metadevice names.
The metadevice names of the current boot disks and the boot disks after the
migration are specified as shown in Table 3-22: Metadevice names.