HP Hitachi Dynamic Link Manager Software - Manual (Page 77)

55
Chapter
3. Creating an HDLM Environment
This chapter describes the procedures for setting up an HDLM environment and the
procedure for canceling those settings.
Make sure that HDLM is installed and the functions have been set up. Set up volume
groups and cluster software to suit your operating environment.
3.1 HDLM System Requirements
3.2 Flow for Creating an HDLM Environment
3.3 HDLM Installation Types
3.4 Notes on Creating an HDLM Environment
3.5 Installing HDLM
3.6 Configuring a Boot Disk Environment
3.7 Migrating from a Boot Disk Environment to the Local Boot Disk
Environment
3.8 Configuring a Mirrored Boot Disk Environment Incorporating SVM
3.9 Checking the Path Configuration
3.10 Setting Up HDLM Functions
3.11 Setting up Integrated Traces
3.12 Creating File Systems for HDLM (When Volume Management Software Is
Not Used)
3.13 Setting Up VxVM
3.14 Setting Up SDS
3.15 Setting Up SVM
3.16 Setting Up VCS
3.17 Uninstalling HDLM