HP Hitachi Dynamic Link Manager Software - Manual (Page 511)

8. Messages
489
KAPL01053-I
If you are sure that there would be no problem when the path is
placed in the Offline(C) status, enter y. Otherwise, enter n.
[y/n]:
Details
The
offline
operation will be started. To continue the
offline
operation,
enter
y
. To cancel the operation, enter
n
.
Action
If you want to execute
offline
processing, enter
y
. If you want to terminate
processing, enter
n
. For details on the
offline
operation, see 6.4 offline (Places
Paths Offline).
KAPL01054-W
During the offline operation processing of the HDLM command, a
path that cannot be placed in the Offline(C) status was detected.
PathID =
aa...aa
Would you like to continue the processing of the
offline operation? [y/n]:
Details
A path that cannot be placed set to Offline(C) was detected during multipath
offline processing. To ignore this path and perform offline processing for the next
path, enter
y
. To cancel offline processing, enter
n
.
aa...aa: Path ID (decimal (base-10) number)
Action
If you want to continue processing the
offline
operation of the HDLM
command for other paths, enter
y
. If you want to terminate processing, enter
n
.
For details on the
offline
operation, see 6.4 offline (Places Paths Offline).
KAPL01055-I
All the paths which pass the specified
aa...aa
will be changed to
the Offline(C) status. Is this OK? [y/n]:
Details
Multiple paths will be collectively set to Offline(C) because the
-hba
or
-cha
parameter was specified. To collectively set multiple paths to Offline(C), enter
y
.
To cancel the operation, enter
n
.
aa...aa:
CHA port
,
HBA
Action
If you want to execute
offline
processing for the paths that meet the specified
requirements, enter
y
. If you want to terminate processing, enter
n
.