HP Hitachi Dynamic Link Manager Software - Manual (Page 507)

8. Messages
485
KAPL01021-E
Cannot execute the HDLM command due to insufficient memory.
Details
Memory required for HDLM command processing could not be allocated.
Action
Terminate unnecessary applications to increase the amount of free memory, and
then retry.
KAPL01023-W
The last Online path for the device cannot be placed Offline(C).
Details
The path specified for the
offline
operation cannot be set to Offline(C) because
it is the last, available path to the LU from the host.
Action
Use the
view
operation of the HDLM command (
dlnkmgr
) to check the status
of the paths. For details on the
view
operation, see 6.7 view (Displays
Information).
KAPL01024-W
The specified parameters cannot be specified at the same time.
Operation name =
aa...aa
, parameters =
bb...bb
Details
aa...aa:
clear
,
monitor
,
offline
,
online
,
set
, or
view
bb...bb: Parameters that cannot be specified at the same time
Action
Execute
help
operation of the HDLM command (
dlnkmgr
) to check which
parameters can be specified at the same time, and then retry. For details on the
help
operation, see 6.3 help (Displays the Operation Format).
KAPL01036-E
The Offline path cannot be placed online. PathID =
aa...aa
Details
aa...aa: Path ID (decimal (base-10) number)
Action
Remove the error in the path, and then retry.
KAPL01039-W
During the online operation processing of the HDLM command, a
path that cannot be placed in the Online status was detected.