HP Hitachi Dynamic Link Manager Software - Manual (Page 141)

3. Creating an HDLM Environment
119
2. Log in to Solaris as a user with root permissions.
3. Execute the
format
command to make sure that the sd or ssd device to be
managed by HDLM is displayed.
# format
4. If you want to remove a device from HDLM management, execute the
format
command to check information for each path of that device.
The information you are checking here will be used in step 17. The following
shows an example of executing the
format
command:
In this example, the shaded portion shows information for each path of the device
you are removing from HDLM management. Type in the appropriate device
number, and then type
quit
to end the
format
command.
5. If the settings of a Quorum device or disk device group are specified for the device
to be managed by HDLM, remove those settings.
For details on how to remove the Quorum device and the VxVM disk group
settings, see (10) Set Up Sun Cluster in 3.5.1 Preparations for a New
Installation of HDLM.
For details on how to unregister an SDS or SVM diskset, see (5) Remove SDS
Settings or (6) Remove SVM Settings in 3.17.2 Preparations for HDLM
Uninstallation. Unregistering a diskset deletes the data in the diskset. Therefore,
back up a diskset before unregistering it.