HP Hitachi Dynamic Link Manager Software - Manual (Page 394)

6. Command Reference
372
0 path(s) were not. Operation name = online
#
-cha -pathid
AutoPATH_ID
Use this parameter to place online, at one time, all the paths that pass through a
specific CHA port. The command will place online all the paths that pass through
the CHA port to which the path with the specified AutoPATH_ID is connected.
Specify the current AutoPATH_ID of the target path, which is displayed by using
the
view
operation. For details on the
view
operation, see 6.7 view (Displays
Information). Leading zeros can be omitted (
000001
and
1
indicate the same
AutoPATH_ID). Therefore, when the target AutoPATH_ID is
000000
, enter
000000
or
0
for the parameter value.
AutoPATH_IDs are re-assigned every time the host is restarted. When you want
to add a new LU without restarting the host, AutoPATH_IDs are re-assigned to
each path of the LU when you execute the
dlmcfgmgr
utility for managing the
HDLM configuration. Always make sure that you execute the
view
operation to
find the current AutoPATH_ID of the target path, before executing the
online
operation.
Example
The following example shows how to place online the paths connected to the
CHA port
0A
. In this example, a path whose AutoPATH_ID is
000002
is
connected to the target CHA port:
# /opt/DynamicLinkManager/bin/dlnkmgr online -cha
-pathid 000002
KAPL01057-I All the paths which pass the specified CHA
port will be changed to the Online status. Is this OK?
[y/n]:y
KAPL01061-I 2 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
#
-chaid
CHA-port-ID
Use this parameter to place online, at one time, all paths that pass through a
specific CHA port. The command will place online all paths connected to the
CHA port that has the specified CHA-port-ID. To display the CHA port IDs,
execute the following
view
operation:
# /opt/DynamicLinkManager/bin/dlnkmgr view -cha
For details, see (5) To display CHA port information in 6.7.2 Parameters.
Example
The following example shows how to place online all paths connected to the