HP Hitachi Dynamic Link Manager Software User Manual
Page 291

4. HDLM Operation
269
The shaded portion indicates mapping from combinations of sd or ssd device types and
instance numbers to HDLM device logical device file names.
4.1.4 Storage System
• Start up the storage system before you start up the hosts, so that Solaris can detect
the storage system.
• Do not change the vendor ID or product ID of a storage system. If you change
either of them, HDLM will not be able to recognize the storage system.
4.1.5 Command Execution
When a path error occurs while a file system is being created or formatted or the
fsck
command is being executed, the operation might not have been completed. If so,
recover from the path error, and then perform the operation again.
4.1.6 Using a Sun HBA
If all of the following conditions are satisfied, the KAPL08019-E and KAPL08022-E
messages indicating a path error may be output to
/var/adm/messages
during boot
processing (even when the path is normal):
• Solaris 8 or Solaris 9 is used.
• A Sun HBA that the ssd driver recognizes is used.
If this situation occurs, execute the
dlnkmgr
view
-path
command to check the path
status after the completion of booting. There are no problems if the path is in
Online
status.