HP Hitachi Dynamic Link Manager Software - Manual (Page 224)

3. Creating an HDLM Environment
202
The default value is 4. You can specify a value from 1 to 16. The value set here
becomes the maximum of n in
/var/opt/hitachi/HNTRLib2/spool/
hntr2
n
.log
. The recommended value for integrated trace collection is 8.
If you do not want to change the number of integrated trace files, leave New
Number(KB) blank, type
!
, and then press the Enter key to return to the Hitachi
Network Objectplaza Trace Library setup menu.
3. Press the Enter key.
The new setting is applied and the Hitachi Network Objectplaza Trace Library
setup menu appears again.
3.11.5 Changing the Buffer Size Per Monitoring Interval Duration
To change the buffer size per monitoring interval:
1.
In the Hitachi Network Objectplaza Trace Library setup menu, type
4
, and then
press the Enter key.
A screen to set the buffer size appears. The current value is displayed in Current
Size(KB).
2. Enter a larger size in New Size(KB).
Set a new buffer size to fit the monitoring interval set in 5: Interval Timer. The
default value is 64. You can specify a value from 8 to 2048 (KB). Set this to a
value smaller than the integrated trace file size set in step 2 of 3.11.3 Changing
the Size of Integrated Trace Files. The recommended value is 256 for collecting
an integrated trace.
If you do not want to change the buffer size, leave New Size(KB) blank, type
!
,
and then press the Enter key to return to the Hitachi Network Objectplaza Trace
Library setup menu.
3. Press the Enter key.
The new setting is applied and the Hitachi Network Objectplaza Trace Library
setup menu appears again.
4. In the Hitachi Network Objectplaza Trace Library setup menu, type
5
and then
press the Enter key.