HP Hitachi Dynamic Link Manager Software - Manual (Page 207)

3. Creating an HDLM Environment
185
# swap -l
swapfile dev swaplo blocks free
/dev/md/dsk/d20 85,20 16 8409584 8409584
# dumpadm
Dump content: kernel pages
Dump device: /dev/md/dsk/d20 (swap)
Savecore directory: /var/crash/host
Savecore enabled: yes
# mount
/ on /dev/md/dsk/d10 read/write/setuid/devices/intr/
largefiles/logging/xattr/onerror=panic/dev=1540064 on Mon
Mar 9 11:00:25 2009
/usr on /dev/md/dsk/d30 read/write/setuid/devices/intr/
largefiles/logging/xattr/onerror=panic/dev=154012c on Mon
Mar 9 11:00:25 2009
12. Set up a two-mirror configuration of
/
(
root
),
swap
, and
/usr
.
# metainit -f d12 1 1 c6t50060E08000436D1d7s0
# metattach d10 d12
# metainit -f d22 1 1 c6t50060E08000436D1d7s1
# metattach d20 d22
# metainit -f d32 1 1 c6t50060E08000436D1d7s6
# metattach d30 d32
13. Copy the SVM state database to the boot disk after migration..
# metadb -a c6t50060E08000436D1d6s7
# metadb -a c6t50060E08000436D1d7s7
14. Delete the SVM in the pre-migration environment.
# metaclear d100 d101 d102
# metaclear d200 d201 d202
# metaclear d300 d301 d302
# metadb -d c8t50060E08000436D1d4s7
# metadb -d c8t50060E08000436D1d5s7