HP Hitachi Dynamic Link Manager Software - Manual (Page 563)

8. Messages
541
KAPL09148-W
Could not modify file. File name =
aa...aa
, Details =
bb...bb
. Please
contact product support.
Details
An HDLM driver configuration definition file or HDLM driver unconfiguration
definition file, aa...aa, could not be updated.
aa...aa: One of the following file names:
•
/kernel/drv/dlmfdrv.conf
•
/opt/DynamicLinkManager/config/dlmfdrv.unconf
•
/kernel/drv/dlmfdrv.conf.bak
•
/opt/DynamicLinkManager/config/dlmfdrv.unconf.bak
bb...bb: Internal code (decimal number)
Action
1. Execute the
DLMgetras
utility for collecting HDLM error information to
obtain the error information.
Contact your HDLM vendor or your maintenance company if you have a
maintenance contract for HDLM. For details on the
DLMgetras
utility, see
7.2 The DLMgetras Utility for Collecting HDLM Error Information. If
aa...aa is
/kernel/drv/dlmfdrv.conf.bak
, or
/opt/
DynamicLinkManager/config/dlmfdrv.unconf.bak
, use the file as
it is because the file will not affect the system.
If aa...aa is
/kernel/drv/dlmfdrv.conf
, or
/opt/
DynamicLinkManager/config/dlmfdrv.unconf
, perform the
following steps.
2. Execute the
dlmsetconf
utility for creating the HDLM driver configuration
definition file to update the file.
For details on the
dlmsetconf
utility, see 7.6 The dlmsetconf Utility for
Creating the HDLM Driver Configuration Definition File.
3. Execute either of the following commands to restart the host:
# reboot -- -r
boot -r
(at the
ok
prompt)