HP Hitachi Dynamic Link Manager Software - Manual (Page 225)

3. Creating an HDLM Environment
203
A screen to set the monitoring interval appears. The current value is displayed in
Current Span(sec).
5. Enter a shorter interval in New Span(sec).
The default value is 10. You can specify a value from 1 to 300 (seconds). The
recommended value is 5 for collecting an integrated trace.
If you do not want to change the monitoring interval, leave New Span(sec) blank,
enter
!
, and then press the Enter key to return to the Hitachi Network Objectplaza
Trace Library setup menu.
6. Press the Enter key.
The new setting is applied and the Hitachi Network Objectplaza Trace Library
setup menu appears again.
3.11.6 Adjusting the Number of Messages to Be Output Per
Monitoring Interval
To adjust the number of messages to be output to fit a particular monitoring interval:
1.
In the Hitachi Network Objectplaza Trace Library setup menu, type
6
, and then
press the Enter key.
A screen to set the monitoring interval for the number of messages output to the
integrated trace file appears. The current value is displayed in Current Span
(sec).
2. Enter a desired interval in New Span(sec).
You can specify a value from 0 to 3600 (seconds). The default and recommended