HP Hitachi Dynamic Link Manager Software User Manual
Page 496

7. Utility Reference
474
For details on the settings functionality, see 6.6 set (Sets Up the Operating
Environment).
#3
You can specify this key only in the following cases:
• For a new installation:
When
on
is specified for the
auto_failback
key in the installation
information settings file
• For an upgrade installation or re-installation:
When
on
is specified for the
auto_failback
key in the installation
information settings file, or when automatic failback is enabled in the
installation pre-settings
#4
If you want to enable intermittent error monitoring, specify this key after
specifying the
auto_failback
and
auto_failback_interval
keys.
The following is an example of an installation-information settings file:
[INSTALLATION_SETTINGS]
installfile_location=/cdrom/cdrom0
logdir=/var/tmp
licensekeyfile=/var/tmp/hdlm_license
driver_config=y
restart=n
[ENVIRONMENT_SETTINGS]
load_balance=on
load_balance_type=exlio
error_log_level=3
error_log_size=9900
error_log_number=2
trace_level=0
trace_file_size=1000
trace_file_number=4
path_health_check=on
path_health_check_interval=30
auto_failback=on
auto_failback_interval=1
intermittent_error_monitor=on
intermittent_error_monitor_interval=30
intermittent_error_monitor_number=3