HP Hitachi Dynamic Link Manager Software - Manual (Page 148)

3. Creating an HDLM Environment
126
name = view, completion time =
yyyy
/
mm
/
dd hh
:
mm
:
ss
#
Nothing is displayed for
Support Cluster
even if you are using cluster
software. However, the cluster-support functions are, in fact, operating without
problem.
22. By checking the execution results of the
view
operation, verify the version of the
installed HDLM.
If
HDLM Version
is
6.5.1-00
, the installed version of HDLM is correct.
23. By checking the execution results of the
view
operation, verify that the programs
are running normally.
If
HDLM Manager
,
HDLM Alert Driver
, and
HDLM Driver
are all
Alive
, the
programs are running normally.
24. If you are using VxVM, execute the following command to confirm that the
DEVICE column of the LUs managed by HDLM is displayed in the
c
W
t
X
d
Y
s
Z
format (for example,
c6t0d10s2
):
# vxdisk list
If the value is displayed in the
c
W
t
X
d
Y
s
Z format, perform the following
procedures:
• Delete the
/etc/vx/disk.info
file.
• Restart the host, or restart the VxVM configuration daemon by executing the
following command:
# vxconfigd -k
25. If you uninstalled HDLM 04-00 or HDLM 04-01 and then installed HDLM 6.5.1,
create a table that shows the correspondence between the HDLM logical device
file names before and after installation of HDLM 6.5.1.
Specify the file (the file you created before you uninstalled HDLM 04-00 or
HDLM 04-01) in which you saved the output results of the
dlnkmgr
command's
view -path
operation, as the input file for the
dlmlisthdev
utility for assisting
HDLM transitions. The following shows an example of executing the
dlmlisthdev
utility when upgrading from HDLM 04-00 to HDLM 6.5.1: