HP Hitachi Dynamic Link Manager Software - Manual (Page 570)

8. Messages
548
You do not have write permission for the file system of the
/var/tmp
directory. Make sure you have access permissions for the file system of the
/var/tmp
directory.
If the error code is
7
:
There is not enough free capacity for the file system of the
/var/tmp
directory. Make sure there is enough free capacity in the
/var/tmp
directory.
If the error code is 10:
The
dlmsetconf
command is not in the default location or you do not have
execution permission for the
dlmsetconf
command. Check the status of the
dlmsetconf
command.
If the error code is 11:
The
reboot
command is not in the default location or you do not have
execution permission for the
reboot
command. Check the status of the
reboot
command.
KAPL09216-E
An error occurred during I/O of a file that installhdlm uses.
Error Code =
aa...aa
,
bb...bb
Details
An error occurred during I/O of a file that
installhdlm
uses.
aa...aa: Error number that indicates the executed processing (decimal (base-10)
number)
bb...bb: Return value of the executed processing (decimal (base-10) number)
Action
Make sure that sufficient free capacity exists for the
/var/tmp
directory. If the
capacity is insufficient, allocate the required amount of capacity, and then retry
the operation. For details about the required free capacity, see (2) Disk Capacity
Requirements in 3.1.7 Memory and Disk Capacity Requirements.
KAPL09217-E
An error occurred during reading of the installation information
settings file. Error Code =
aa...aa
,
bb...bb
Details
An error occurred while reading the installation information settings file.
aa...aa: Error number (decimal number) that specifies the executed processing
bb...bb: Return value (decimal number) of the executed processing