beautypg.com

HP Hitachi Dynamic Link Manager Software User Manual

Page 351

background image

4. HDLM Operation

329

Execute the following command to clear the install mode of a cluster when it

consists of two nodes:

# /usr/cluster/bin/scconf -c -q reset

17. Perform registration for the disk device group, create the file system, or set up the

global mount as necessary.
For details, refer to the Sun Cluster documentation.

(2) Changing a Non-HDLM-Managed Device to an HDLM-Managed Device (When

the Node Must Be Restarted)

Note

On all nodes in the cluster, have HDLM driver recognize the LUs to be managed,

and make the configuration the same on each node.

To change a non-HDLM-managed device to an HDLM-managed device (when the

node needs to be restarted):
1.

Log in to Solaris as a user with root permissions.

2.

Check the LU to be managed by HDLM.
You can check the LU by using the

format

command. Figure 4-13: Example

of executing the format command shows an example of executing the

format

command. The shaded portion represents the LU to be managed by HDLM.
Figure 4-13: Example of executing the format command