HP Hitachi Dynamic Link Manager Software - Manual (Page 426)

6. Command Reference
404
#
Because both
PathID
and
Status
are always displayed, you do not have to
specify any parameters.
In the sub-parameters following
-path -item
, you can list the paths (
-hdev
)
and sort the list (
-srt
). If you omit both parameters, the command displays
information for all the paths in ascending order of AutoPATH_IDs.
These sub-parameters are:
-hdev
host-device-name
Displays information only for the paths accessing the specified host device.
Specify the name of the logical device file (minus the slice number, in
c
U
t
X
d
Y format) for the HDLM device to indicate the desired host device.
The host-device-name string is case sensitive.
When you specify this parameter,
HDevName
is displayed by default. It is not
necessary to specify
hd
for the
-item
parameter.
-stname
Use this parameter to display the model ID of the storage system in the
product ID element of the
DskName
field. When this parameter is omitted,
the command displays the product ID or emulation type of the storage system
instead.
For details about the information to be displayed for product IDs, see
Table 6-14: Product ID Displayed by the view -path Operation.
When you use this parameter,
DskName
is displayed by default. It is not
necessary to specify
dn
for the
-item
parameter.
-srt {pn|lu|cp}
Type type
IO-Count ic
IO-Errors ie
DNum dnu
HDevName hd
IEP iep
Selectable items Sub-parameters