HP Hitachi Dynamic Link Manager Software - Manual (Page 193)

3. Creating an HDLM Environment
171
d10: Mirror
Submirror 0: d11
State: Okay
Submirror 1: d12
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 25190400 blocks (12 GB)
d11: Submirror of d10
State: Okay
Size: 25190400 blocks (12 GB)
Stripe 0:
Device Start Block Dbase
State Reloc Hot Spare /dev/dsk/c8t50060E08000436D1d4s0
0 No Okay Yes
d12: Submirror of d10
State: Okay
Size: 25190400 blocks (12 GB)
Stripe 0:
Device Start Block Dbase
State Reloc Hot Spare /dev/dsk/c8t50060E08000436D1d5s0
0 No Okay Yes
...
12. Execute the
dlnkmgr
command's
view -path
operation to confirm that an I/O
is issued to the LU set as the boot disk.
# /opt/DynamicLinkManager/bin/dlnkmgr view -path
Paths:000032 OnlinePaths:000026
PathStatus IO-Count IO-Errors
Reduced 791869 0
PathID PathName DskName
iLU ChaPort Status Type IO-Count IO-Errors
DNum HdevName
000000 0000.0000.0000000000653200.0006 HITACHI .DF600F
.77010152 0034 0C Online Own
131762 0 - c8t50060E08000436D1d4
000001 0000.0000.0000000000653600.0006 HITACHI .DF600F
.77010152 0034 1C Online Non
44 0 - c8t50060E08000436D1d4
000002 0001.0000.0000000000653200.0006 HITACHI .DF600F
.77010152 0034 0C Online Own