HP Hitachi Dynamic Link Manager Software - Manual (Page 230)

3. Creating an HDLM Environment
208
Figure 3-19: An output example for the mount -p command
Edit the
/etc/vfstab
file as appropriate based on the settings output. The
shaded portion indicates the part of the
/etc/vfstab
file to set.
An example of how to edit the
/etc/vfstab
file is shown below in
Figure 3-20: An example of how to edit the /etc/vfstab file.
Figure 3-20: An example of how to edit the /etc/vfstab file
Add the shaded portion to the file.