HP Hitachi Dynamic Link Manager Software - Manual (Page 349)

4. HDLM Operation
327
HDLM Alert Driver Ver WakeupTime ElogMem Size
Alive
x.x.x-xx yyyy
/
mm
/
dd hh
:
mm
:
ss
4096
HDLM Driver Ver WakeupTime
Alive
x.x.x-xx yyyy
/
mm
/
dd hh
:
mm
:
ss
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time =
yyyy
/
mm
/
dd hh
:
mm
:
ss
#
• Even when cluster software is used, it is not displayed in
Support Cluste
r.
Nevertheless, no problem exists with the functionality for cluster support.
10. Use the execution results from the
view
operation to check that the programs are
operating normally.
If
HDLM Manager
,
HDLM Alert Driver
, and
HDLM Driver
are all
Alive
, the
programs are operating normally.
11. Check the LU that you removed from HDLM management.
You can check the LU by using the
format
command. Figure 4-12: Example
of executing the format command shows an example of executing the
format
command. The shaded portion represents an LU not managed by HDLM.
Figure 4-12: Example of executing the format command
12. Delete the device ID information for devices that do not exist.