HP Hitachi Dynamic Link Manager Software - Manual (Page 284)

3. Creating an HDLM Environment
262
later:
1.
Execute the following command to import the disk group:
# vxdg import disk-group-name
2. To use a volume that belongs to a disk group, execute the following command to
activate the volume:
# vxvol -g disk-group-name startall
(2) SDS Settings
Create meta devices. For details, refer to the SDS documentation.
(3) SVM Settings
Create volumes. For details, refer to the SVM documentation.
(4) Sun Cluster Settings
After restarting the host, perform steps 1 to 4 on all nodes.
When setting Quorum devices, perform step 5.
When setting a disk device group, perform step 6.
1.
Remove the device ID information of devices that do not exist. The following
shows an example of executing the command:
# /usr/cluster/bin/scdidadm -C
2. Assign device IDs. The following shows an example of executing the command:
# /usr/cluster/bin/scdidadm -r
3. Notify the server of the new device ID information. The following shows an
example of executing the command:
# /usr/cluster/bin/scdidadm -ui
4. Update the Sun Cluster global device namespace. The following shows an
example of executing the command:
# /usr/cluster/bin/scgdevs