HP Hitachi Dynamic Link Manager Software User Manual
Page 446
6. Command Reference
424
Example
# /opt/DynamicLinkManager/bin/dlnkmgr view -hba
HbaID Port.Bus IO-Count IO-Errors Paths OnlinePaths
Physical Device
00000 0000.0000 71520 0 20 20
/devices/pci@8,70000/JNI,FCE@2
00001 0002.0000 425 100 20 10
/devices/pci@8,70000/JNI,FCE@3
00002 0001.0000 1425 0 20 20
/devices/pci@8,70000/JNI,FCE@4
KAPL01001-I The HDLM command completed normally.
Operation name = view, completion time =
yyyy
/
mm
/
dd
hh
:
mm
:
ss
#
The following shows the subsequent sub-parameters:
-srt pb
Sorts the HBA port information by the host port numbers (
Port
) and bus
numbers (
Bus
).
-c
Does not display the SCSI device configuration information (
Physical
Device
).
-portwwn
Displays port WWN information for HBAs connected to the storage system
using a 16-digit hexadecimal number.
-t
Omits the title for each information item.
(5) To display CHA port information
-cha
Use this parameter to display information about the paths that pass through each
OnlinePaths
Number of available paths in the displayed paths, indicated by a decimal number. When
the value of
Paths
equals the value of
OnlinePaths
, all paths are online. If the value of
OnlinePaths
is less than that of
Paths
, some paths might have an error status, in which
case you should check the status of individual paths and take appropriate action for any
paths that have an error status.
Physical Device
HBA port configuration information. The names of the physical device files under the
/
devices
directory are displayed.
Item
Description