HP Hitachi Dynamic Link Manager Software - Manual (Page 633)

8. Messages
611
utility for collecting HDLM error information to collect the error information, and
then contact your HDLM vendor or maintenance company if there is a
maintenance contract for HDLM.
For details on the
DLMgetras
utility, see 7.2 The DLMgetras Utility for
Collecting HDLM Error Information.
1036
Details
An attempt to acquire information about the HDLM version or SP version has
failed.
Action
Re-execute the command. If the same error occurs again, execute the
DLMgetras
utility for collecting HDLM error information to collect the error information, and
then contact your HDLM vendor or maintenance company if there is a
maintenance contract for HDLM.
For details on the
DLMgetras
utility, see 7.2 The DLMgetras Utility for
Collecting HDLM Error Information.
1037
Details
A parameter is invalid.
Action
Refresh the host information, and then perform the operation again. If the same
error occurs again, execute the
DLMgetras
utility for collecting HDLM error
information, and then contact your HDLM vendor or maintenance company if
you have a maintenance contract for HDLM. For details on the
DLMgetras
utility, see 7.2 The DLMgetras Utility for Collecting HDLM Error Information.
1041
Details
An attempt to communicate with the HDLM manager has failed.
Action
Check whether the HDLM manager is running on the host. If it is not running,
start the HDLM manager.
1042
Details
Information about the path configuration on the specified LU does not match the
path configuration information held by HDLM.