HP Hitachi Dynamic Link Manager Software - Manual (Page 540)

8. Messages
518
cc...cc: 0 (fixed)
Action
Check the message of the HDLM command (
dlnkmgr
) or the HDLM manager,
and then take the appropriate action. If you do not know the appropriate action,
execute the
DLMgetras
utility for collecting HDLM error information, and then
contact your HDLM vendor or the maintenance company if there is a maintenance
contract for HDLM and report the error and detail code. For details on the
DLMgetras
utility, see 7.2 The DLMgetras Utility for Collecting HDLM Error
Information.
KAPL05039-W
Received the IOCTL error from Disk Driver. errno =
aa...aa
(
bb...bb
:
cc...cc
) Check whether the path is correctly connected to
the disk.
Details
The HDLM filter driver received an IOCTL error from a lower sd or ssd driver.
aa...aa: Error code (decimal number)
bb...bb: IOCTL code (hexadecimal number)
cc...cc: Minor number of the sd or ssd driver (hexadecimal number)
Action
Check whether the path is correctly connected to the disk.
KAPL05040-E
The disk geometry or partition information could not be set.
IOCTL =
aa...aa
, ErrorCode =
bb...bb
, PathID =
cc...cc
After fixing the
path, change its status to Online. Refer to the HDLM User's Guide
for instructions how to change the path status to Online.
Details
The HDLM filter driver sent a request to the lower sd or ssd driver for IOCTL for
the disk geometry or the partition information settings, but an error was returned.
aa...aa: IOCTL code (hexadecimal number)
bb...bb: Error code (decimal number)
cc...cc: Path ID (decimal number)
Action
Remove the error from the paths, and then place the paths in the Online status. If
the error occurred for all of the paths, retry the operation.