HP Hitachi Dynamic Link Manager Software - Manual (Page 305)

4. HDLM Operation
283
4.3 Starting and Stopping the HDLM Manager
If an error occurs in the system, such as in an HDLM program, you may need to
manually stop or start the HDLM manager to recover from the error.
4.3.1 Starting the HDLM Manager
To start the HDLM manager, log in to Solaris as a user with root permissions and then
execute the following command.
# /etc/init.d/DLMManager start
Lower-case characters can be used for the command name (
dlmmanager
).
# /etc/init.d/dlmmanager start
The startup script that was set up during HDLM installation runs, and starts the HDLM
manager.
Use the following HDLM command's view operation to confirm that the HDLM
manager is running:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -msrv
HDLM Manager Ver WakeupTime
Alive
x.x.x-xx yyyy
/
mm
/
dd hh
:
mm
:
ss
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time =
yyyy
/
mm
/
dd hh
:
mm
:
ss
#
When the
HDLM Manager
column shows
Alive
, the HDLM manager is active.
4.3.2 Stopping the HDLM Manager
To stop the HDLM manager, log in to Solaris as a user with root permissions, and then
execute the following command:
# /etc/init.d/DLMManager stop
Lower-case characters can be used for the command name (
dlmmanager
).
# /etc/init.d/dlmmanager stop
The stop script that was set up during HDLM installation runs, and stops the HDLM
manager.
Execute the following
dlnkmgr
command's
view
operation to confirm that the
HDLM manager has stopped.