HP Hitachi Dynamic Link Manager Software - Manual (Page 155)

3. Creating an HDLM Environment
133
The following shows an example of executing the command for mounting the
DVD-ROM:
# mkdir /cdrom/cdrom0
# mount -F hsfs -o ro /vol/dev/dsk/c0t6d0/
DVD-ROM-volume-name
/cdrom/cdrom0
4. Perform the installation.
• If you are not performing an unattended installation of HDLM, execute
either of the following installation commands:
When executing the
installux.sh
script
#
DVD-ROM-mount-point
/installux.sh
When executing the
pkgadd
command
# pkgadd -a
DVD-ROM-mount-point/HDLM_Solaris/
DLManager/
install/update -d
DVD-ROM-mount-point/HDLM_Solaris
DLManager
• If you are performing an unattended installation of HDLM, execute the
installux.sh
script or the
installhdlm
utility as shown below.
When executing the
installux.sh
script
#
DVD-ROM-mount-point
/installux.sh -f /
any-directory
/
installation-information-settings-file
When executing the
installhdlm
utility
#
DVD-ROM-mount-point/HDLM_Solaris
/hdlmtool/instutil/
installhdlm -f /
any-directory
/
installation-information-settings-file
If execution of the utility is completed without problems, the KAPL09211-I
message is output.
After confirming that the KAPL09211-I message has been output, execute the
following command to delete the installation-information settings file:
# rm -r /
any-directory
/
installation-information-settings-file
If the
restart
key is set to
n
(so that the computer is not restarted) in the
installation-information settings file, go to step 7.
If the
restart
key is set to
y
(to restart the computer) in the
installation-information settings file, go to step 8.
5. If the license key file is not found, follow the message about a license key
displayed during installation.
If the license needs to be updated and the license key file named
/var/tmp/