Teledyne LeCroy UWBTracer User Manual - Manual (Page 74)

Chapter 5: Searching Traces UWBTracer/Trainer User Manual
56
LeCroy Corporation
5.3 Go to Frame/Packet/Transaction/Transfer
To display a specific frame or decode level, follow these steps:
Step 1 From the Search menu, select:
Go to Frame/Packet/Transaction/Transfer
to display the Go to PLCP/Packet/Transaction/Transfer dialog box (Figure 5.2):
Figure 5.2 Go To PLCP/Packet/Transaction/Transfer Dialog Box
Step 2 Select the trace level view in the Go to field from the drop-down list.
Step 3 Enter the number of the frame, packet, transaction, segment, or transfer.
Step 4 Click OK.
The trace view shows the selected item at the top of the main window.