Teledyne LeCroy UWBTracer User Manual - Manual (Page 311)

UWBTracer/Trainer User Manual Appendix C: WiMedia Platform Compliance Tests
LeCroy Corporation
293
Appendix C: WiMedia Platform
Compliance Tests
This appendix describes the UWBTrainer™ TX-only Test System Exerciser scenarios
and UWBTracer™ VSE Compliance scripts for test cases from the
WiMedia Compliance and Interoperability (C&I) Platform Test Specification 1.1.
For information about running UWBTrainer exerciser scenarios, see Chapter 14 “Traffic
Generation Overview” on page 229.
For information about running verification scripts, see See Section 9.8 "Running
Verification Scripts" on page 140.
C.1 UWBTrainer TX-only Exerciser Scenarios
All TX-only tests from the WiMedia Platform Test Specification 1.1 are available.
Note: The current LeCroy implementation of Test Case 6 differs slightly from the test
specification. However, it still invokes the correct responses from compliant devices.
C.2 UWBTracer VSE Compliance Scripts
The following VSE compliance scripts are available:
• Background Checks.vse: This script implements the Beacon Format checks
(BFC) and Beacon Protocol checks (BPC) of the WiMedia Platform Test
Specification 1.1. In addition, this script checks for DevAddr collisions, beacon slot
collisions, and HCS error slot collisions.
• Verify Test Case [nn].vse: This set of scripts verifies the Test System output for
TX-only test cases, as defined in the WiMedia Platform Test Specification 1.1.
Note: These scripts are not designed to verify behaviors of a DUT or INTD.
The following scripts, which were included in previous versions of UWBTracer, are
obsolete and are superseded by the Background Checks.vse script:
• Beacon Format Test.vse
• Beacon Period Synchronization.vse
• Beacon Protocol Observation Background Tests.vse
• Beacon Slot Collision Test.vse
• Clock Accuracy.vse
• Generated DevAddr Conflict Test.vse