Teledyne LeCroy UWBTracer User Manual - Manual (Page 239)

UWBTracer User Manual Chapter 13: Recording
LeCroy Corporation
221
Chapter 13: Recording
This chapter describes how to conduct recording sessions.
13.1 Making a Recording
Before Starting a Recording
Before starting a recording, verify the following:
•
Test environment has been set up and configured correctly.
• Latest BusEngine™ and firmware versions have been downloaded to the analyzer
(Chapter 13).
• Recording Options settings are appropriate (see Chapter 11).
• Analyzers participating in the recording are linked to the software application locally
or through a network (see Chapter 10).
Starting a Recording
To start a recording session manually, click the Recording button in the main
tool bar or select Record > Start.
Stopping a Recording
To manually stop the recording process, click the Stop button or select
Record > Stop.
Note: If Recording Options is set to the Snapshot recording type, recording
stops automatically when the recording buffer is full.
After stopping a recording, the recorded traffic automatically uploads from the analyzer
to the host PC, where it is saved as a trace file in the default location. You can set the
default location of a saved trace file in the General tab of the Recording Options window
(see “Trace Filename and Path” on page 182).