Teledyne LeCroy UWBTracer User Manual - Manual (Page 150)

Chapter 9: Reports UWBTracer/Trainer User Manual
132
LeCroy Corporation
Adding a WiMedia Device
You can add a WiMedia device and change its settings, temporal key,
connection context, or WSS group.
Edit General Settings
To add a WiMedia device:
Step 1 In the Device List window, click the Add New Device button to
display the Add New Device dialog box at the General Settings tab:
Figure 9.33 Add New Device Dialog Box General Settings Tab
Step 2 In the Add New Device dialog box, select the Device Type as
WiMedia Device, Wireless USB Host, Wireless USB Device, or
WLP Device.
Step 3 Enter the EUI-48 in 12-digit hexadecimal.
Step 4 Enter the Device Address in 4-digit hexadecimal.
Step 5 (optional) Enter an Alias (up to 54 characters).
Step 6 (optional) Enter any User Notes (up to 76 characters).
Step 7 (optional) Select the DUTs checkbox if applicable.