Teledyne LeCroy UWBTracer User Manual - Manual (Page 158)

Chapter 9: Reports UWBTracer/Trainer User Manual
140
LeCroy Corporation
9.8 Running Verification Scripts
You can perform custom post-process analysis of the open trace by running a
verification script over the trace. A verification script instructs the UWBTracer/Trainer
application to send trace and analysis information to the script. A verification script also
contains script code (written using LeCroy Script Language) used to process trace data
and output that data in different formats.
For information about the available scripts, see Appendix C “WiMedia Platform
Compliance Tests” on page 293.
Note: You may write your own verification scripts to perform custom verification
and analysis. For information on how to write a verification script, see the
UWBTracer Verification Script Engine Reference Manual.
To run a verification script over a trace:
Step 1 Select the UWBTracer/Trainer™ main menu item
Report > Run verification scripts or click the
Run verification scripts button on the main tool bar (if it is not hidden):
Figure 9.42 Run Verification Scripts Command