Teledyne LeCroy UWBTracer User Manual - Manual (Page 135)

UWBTracer/Trainer User Manual Chapter 9: Reports
LeCroy Corporation
117
9.5 Real-Time Statistics
To display a summary of the occurrence of various types of protocol units in a trace file,
select Report > Traffic Summary from the Report menu. A Traffic Summary window
appears, showing the traffic data (Figure 9.5).
To display information on links activity in real-time, select Report > Real-Time Statistics
from the Report menu. The Real-Time Statistics window shows frames, errors, and
events occurrences (Figure 9.17).
Figure 9.17 Real-Time Statistics window
The window has two areas:
• Graph Area (left side of window): Provides graphs that show occurrences of
particular frames, errors, and events.
• General Statistics Area (right side of window): Provides displays that show signal
strength, link quality, number of frames, and signal status. All data that is displayed
is calculated as averages over a sampling period.
Changing Devices
The window can display information from multiple analyzer devices. You toggle displays
for each device by clicking on tabs in the General Statistics area. For example, as shown
in Figure 10.19, the SN567 tab is selected. The display currently shows information for
the SN567 device. To switch the display to information for the SN566 device, click the
SN566 tab.