Teledyne LeCroy UWBTracer User Manual - Manual (Page 51)

UWBTracer/Trainer User Manual Chapter 3: Software Overview
LeCroy Corporation
33
3.12 Adding Comments to the Trace
You can create, view, or edit the 100-character comment field associated with each Trace
file.
Step 1 From the File menu, select Edit Comment to display the Edit Trace
Comment dialog box.
Figure 3.11 Edit Trace File Comment Dialog Box
Step 2 Create, view, or edit the comment.
Step 3 Click OK.
3.13 Set Marker
The Set Marker feature allows frames to be marked so you can navigate back to events
of interest. Markers also provide you with a way of tagging events so you can perform
timing calculations between them. A marker can be applied to any display entity (frame,
WUSB packet, WUSB transfer, and so on).
The Set Marker command works in conjunction with the Go to Marker feature. Once you
have marked a frame, you can navigate back to it by selecting Search > Go to Marker,
and then selecting the marker of interest from the list.
To set a marker on a frame:
Step 1 In the trace, click the MPI field for the frame number you wish to mark.
Step 2 From the pop-up menu that appears, Select Set Marker (Figure 3.12).
Figure 3.12 Setting a Frame Marker