Properties window – Teledyne LeCroy UWBTracer User Manual User Manual
Page 283
UWBTracer/Trainer User Manual
Chapter 15: Creating and Editing Generation Files
LeCroy Corporation
265
Properties Window
The Properties window lists all properties and their values for the selected module.
Parameters/values can be changed by entering text into the text boxes or by selecting
items from pull-down menus.
For example, the Declarations Default has the properties:
•
Type: Click Enter to store string entry.
•
Element Type: Declarations.You cannot modify the number.
•
include file name list: Default is Uwbgeneration.Ginc and
other_frame_templates.ginc. You can add more .ginc files.
•
Description: Enter a description.
•
Element Comment: Default is “Default”. Enter further comments.
•
Element Unique ID: Default is 16. You cannot modify the number.
Begin has the properties:
•
Type: Click Enter to store string entry.
•
Element Type: Begin.You cannot modify this.
•
Description: Enter a description.
•
Element Comment: Enter comments.
•
Element Unique ID: Default is 3. You cannot modify the number.
End has the properties:
•
Type: Click Enter to store string entry.
•
Element Type: End.You cannot modify this.
•
Description: Enter a description.
•
Element Comment: Enter comments.
•
Element Unique ID: Default is 6. You cannot modify the number.
The fields which are part of Frame Templates are shown in one of the two following ways
•
FieldName : n (where n is the number of bits in the fixed-length field. Bit fields
always have a fixed length.)
•
FieldName : m Bytes (where m is the number of bytes that you specify. Byte fields
may have from 0 to any number of blank separated hex values.)