Teledyne LeCroy UWBTracer User Manual - Manual (Page 278)

Chapter 15: Creating and Editing Generation Files UWBTracer/Trainer User Manual
260
LeCroy Corporation
The Condition Register Elements have the properties:
•
Frame Type: Beacon, Data, Command, Control, Agg_Data, WUSB_MMC,
WUSB_Data_Out, WUSB_Hand, WUSB_DN, WUSB_Data_In,
•
Template Name: Select first from a list of defined templates.
•
Condition Name: Enter a unique name.
•
AutoReset: Select Yes to automatically reset the condition after it is triggered.
Select No to not reset the condition after it is triggered. Select UNDEFINED
to turn off AutoReset. Default is UNDEFINED.
•
Counter: Enter an integer to specify the number of times the condition event
occurs before the condition is triggered. Default is 1.
•
TimeVar Index: Enter the index name of the Time variable in which to keep
the condition timestamp when it is triggered or leave UNDEFINED. Default is
UNDEFINED (timestamp is not saved).
•
Rate: Select from list.
•
Reserved0: Enter an integer. Default is 0.
•
Len7_0: Enter an integer. Default is 0.
•
Scr: Enter an integer. Default is 0.
•
Reserved1: Enter an integer. Default is 0.
•
Len11_8: Enter an integer. Default is 0.
•
BG_Isb: Enter an integer. Default is 0.
•
TFCode: Select from list.
•
PreType: Select from list.
•
BM: Select from list.
•
Reserved2: Enter an integer. Default is 0.
•
Reserved3: Enter an integer. Default is 0.
•
RETRY: Select from list.
•
CtrlType: Select from list.
•
FrameType: Enter a type.
•
AckPolicy: Select from list.
•
SECURE: Select from list.
•
Version: Enter an integer. Default is 0.
•
DestAddr: Enter an integer. Default is 0.
•
SrcAddr: Enter an integer. Default is 0.
•
Reserved4: Enter an integer. Default is 0.
•
MoreFrag: Select from list.