Teledyne LeCroy UWBTracer User Manual - Manual (Page 62)

Chapter 3: Software Overview UWBTracer/Trainer User Manual
44
LeCroy Corporation
Exporting Packets to UWBTrainer Script
You can export data frames to a .uwbg file for use in UWBTrainer. In the export dialog
box, you can select the frame range and the channel (if more than one channel is in use).
Note: Only frames visible in the Trace View are exported.
To restrict the exported frames, you may use any of the Hiding mechanisms to hide the
frames you do not want to export. These mechanisms include:
• Executing a Find All search
• Using the quick filters from the application toolbar
To export frames from a specific source (such as a WUSB Host):
Step 1 Open a trace file, then open the Find dialog.
Step 2 In the Search For field (at the top), select WiMedia Frames.
Step 3 In the Event Groups section, select MAC: Source Addresses.
Step 4 In the MAC: Source Addresses (Hex) section, select the address of the
WUSB Host to be exported.
Step 5 Check the Find All box.
Step 6 In the Combining Specified Event Groups section, select the
Intersection option.
Figure 3.24 Example Find Dialog for Exporting to a UWBTrainer Script
Step 7 Click OK to open a new window showing only the matching frames.