Teledyne LeCroy UWBTracer User Manual - Manual (Page 27)

UWBTracer/Trainer User Manual Chapter 2: Hardware Description
LeCroy Corporation
9
• RF Coaxial Cable (SMA) [in Standard Cable Kit]
• USB cable for connecting the analyzer to a host machine
Figure 2.3 USB cable and RF Coaxial Cable (SMA)
• Synchronization Cable for synchronizing multiple analyzers. The Synchronization
Cable connects to the SYNC IN and SYNC OUT connectors located on the
UWBTracer/Trainer rear panel (Figure 2.15). (For more information about setting up
multiple analyzers, see Section 10.3, “Multiple Analyzer Synchronization” on page
162.)
Figure 2.4 Synchronization Cable and Trigger Cable
• Trigger Cable (TRIG-IN/TRIG-OUT BNC Y-cable) for connecting to external equip-
ment (for example, for triggering capturing in a LeCroy oscilloscope).