Teledyne LeCroy UWBTracer User Manual - Manual (Page 42)

Chapter 3: Software Overview UWBTracer/Trainer User Manual
24
LeCroy Corporation
Record
Start Causes the Analyzer to begin recording.
Stop Causes the Analyzer to stop recording.
Reupload Opens a window that controls partial uploading.
Report
File Information Displays information about the recording such as the number of frames
and triggering setup.
Error Summary Displays the Errors report of the Traffic Summary, listing the numbers of
each error type.
Timing Calculations Calculates timing between two frames.
Traffic Summary Summarizes the numbers and types of errors, packets, transactions,
split transactions, and transfers that occurred in the open trace.
Device List Lists the DUTs, active devices, archive devices, and wireless USB in the
Device List window by DUTs, Type, EUI-48, Address, Alias,
Last Updated, and User Notes.
Timing Analysis Opens the Timing Analysis window with a Beacon Period and/or
WUSB Detail View.
Run Verification
Script Opens a window to allow you to run verification scripts
over the open trace.
Search
Go to Trigger Positions the display to show the triggering event at the top.
Go to Frame/
Packet/Transaction/
Transfer
Positions the display to show a specific frame or decode level.
Go to Marker > Positions the display to the selected marked frame.
Go to > Positions the display to the specified item.
Find Allows searches by multiple criteria.
Find Next Looks for the next instance of an event specified with Goto or Find.
Search Direction Allows the search direction to be changed from Forward to Backward or
Backward to Forward.
Search Channel MPI or RF
Menu/Option Function