Teledyne LeCroy UWBTracer User Manual - Manual (Page 298)

Chapter 16: Updates and Licensing UWBTracer User Manual
280
LeCroy Corporation
16.4 BusEngine, Firmware, and Plugin Init Updates
Often you need to update BusEngine, firmware, and Plugin Init files when you update the
UWBTracer/Trainer software. The software Readme file indicates if Plugin Init,
BusEngine, and/or firmware updates are necessary.
Note: Within a new software release, it might also be necessary to update the
BusEngine hardware of the analyzer. The Readme file lets you know if this
is necessary.
Automatic Update of BusEngine, Firmware, and Plugin Init
When you update UWBTracer/Trainer software, the new version might not match (be
compatible with) the Plugin Init, BusEngine, and firmware currently installed on the
analyzer. As the software is loaded, it determines if there is a mismatch. If so, the
software initiates automatic update of the Plugin Init, firmware, and BusEngine.
A dialog box appears to confirm that you want to proceed with the update. If so, click OK.
The update is executed.