Teledyne LeCroy UWBTracer User Manual - Manual (Page 179)

UWBTracer/Trainer User Manual Chapter 10: Connecting to Analyzers
LeCroy Corporation
161
Step 3 To add a host and analyzer to the list, click Add to open a Add Analyzer
Network Node dialog box.
Figure 10.6 Add Analyzer Network Node Dialog Box
Step 4 Browse to the host that has an analyzer attached to it and double-click it
to add the host to the Analyzer Network dialog.
Step 5 Click Close to close the dialog box.
Step 6 Select Setup > All Connected Devices ... to open the Analyzer Devices
dialog box.
Step 7 Uncheck all boxes except the one for the remote analyzer to which you
wish to connect.
Step 8 Click Close to close the dialog box and establish a connection to the
selected analyzer.