Teledyne LeCroy UWBTracer User Manual - Manual (Page 155)

UWBTracer/Trainer User Manual Chapter 9: Reports
LeCroy Corporation
137
Join or Remove WLP Device from Existing WSS Group using WLP
Settings
To add connection contexts for a WLP Device:
Step 1 Select the WLP_Settings tab.
Figure 9.39 Add New Device Dialog Box WLP Settings Tab
Step 2 Use check boxes to indicate if the WLP device is a Device, Bridge,
and/or Remote Bridge.
Step 3 Indicate the WSS’s that the WLP device has joined and not joined, using
the Add and Remove buttons.
Step 4 Click OK to return to the Device List.