Teledyne LeCroy UWBTracer User Manual - Manual (Page 195)

UWBTracer/Trainer User Manual Chapter 12: Recording Options
LeCroy Corporation
177
Chapter 12: Recording Options
The recording options are the parameters for the recording session. You set the
recording options to obtain only the trace information you need.
To use the Recording Options window:
• From the Setup menu, select Recording Options.
OR
• From the Tool bar, select the Recording Options button to display the
Recording Options window (Figure 12.1).
The Recording Options window has the tabs:
• General: General recording characteristics, including buffer size, recording type,
and Trace filename and path
• MPI: Specific recording characteristics
• RF: Specific recording characteristics
• USB Assoc: USB_Cable_Association traffic
• Recording Rules: Sets triggers and filters.
Note: The settings you configure apply to all recordings made by the analyzer.
You can save and load recording options. The following sections describe the General,
MPI, RF, USB Assoc., and Recording Rules tabs.