Teledyne LeCroy UWBTracer User Manual - Manual (Page 148)

Chapter 9: Reports UWBTracer/Trainer User Manual
130
LeCroy Corporation
To change the properties in the Bus Utilizations graph:
Step 1 In the Graph Areas menu, click New to display the Graph Area
Properties dialog box.
Figure 9.31 Graph Area Properties Dialog Box
Step 2 Select the graph or click New to make a new graph.
Step 3 Enter a graph title in the Title field.
Step 4 Select the Type: Packet length, Data Payload length, RSSI, LQI, or Data
Throughput.
Step 5 Select the Appearance: single or multiple color bars or lines, or thick
lines. If you selected bars, select the Color.
Step 6 Click OK.